A glimpse at the production process of handbag hardware accessories

 

If you are interested in leathercraft or leatherwork, and you need products such as Dog Hooks, Rings, Locks, Buckles, Studs, Logos, Cord Stoppers, Bag Feet, Ornaments, Frames, or Holders, you maybe interested in the production process of handbag hardware accessories.

Step 1:The mold is created for the product of the bag hardware.

Step 2:Put the finished mold on the die-casting machine to die-cast the product.
Die-casting machines are distinguished according to the different tonnage and ordinary handbag hardware and purse hardware accessories generally use 25-ton die-casting machines. It needs to be very skillful to operate a die-casting machine to produce high quality pieces. It’s up to the skill of the master of the press. When pressing the machine, the pressure needs to be controlled in a good manner. If the pressure is too high, the product will have many burrs and consume extra electricity. If the pressure is too little, potholes will appear on the surface of the product, and the surface of the product will not be smooth and uneven.

Step 3: Polishing & electroplating.
It is the most important part in the production process of handbag hardware accessories which need to be very shiny and smooth

Step 4(optional) Attach foot piece.
Because the bag hardware product is to be fixed on the bag, it is necessary to attach the iron wire foot piece. A mechanical rig is used to press down the iron wire and fix it on the hardware accessory. Also tapping machine is used to tap screw hole on the accessories if screw holes are required.

visit nikka accessory for more production information:
https://nikka-accessory.com/